Liquid level measurement is a field widely used in industry for a large number of processes: product storage, regulation and dosing of reagents, transport, etc. Although ubiquitous in practice on industrial sites, level measurement has not been the subject of the deployment of a metrological traceability chain and associated calibration services.…

Notch torque or relaxation torque is an important parameter in permanent magnet (PM) motors. The relaxation torque of PM motors is made up of the retained torque (cogging) and the friction torque. The cogging torque is generated by the attraction / interaction of the magnetic poles on the teeth (structure in ...

Manufacture of signal conditioning devices. In all areas of industry, there is a need for robust measurement, isolation and transmission. For a refrigeration system or an industrial furnace, as for the largest dam in the world in China, JM Concept has gained worldwide recognition among integrators, panel builders and specialized distributors.…

The range of TS series torque sensors is growing! With the introduction of models TS 109 to TS 111 covering the measuring ranges from 20 N m to 100 N m Magtrol is expanding its range of TS series torque meters. 11 nominal ranges are now available, covering measurement ranges from 50 mN · m to 100 N · m.…

Zephyr III 50: a new 3D scanner for checking small geometries on CMMs. The new KREON Zephyr III 50 is a 3D scanner dedicated to the advanced digitization of small geometries on CMMs. Accurate (5 µm) and benefiting from a high acquisition frequency (300 Hz), the Zephyr III 50 allows parts to be checked ...

The new Ace + measuring arm from KREON The new Ace + measuring arm from KREON offers significantly higher levels of precision. With the Ace + measuring arm, Kreon is supporting the changing expectations of its customers, whose performance requirements are increasing. ACE + arms benefit from an advanced calibration process ...

The General Assembly of the Measurement Network was held on June 29 in Cergy. 19 directors now form the Board of Directors and the new Bureau of the Association which has appointed Claunel Massiès as President as representative of the WIKA company. He will be surrounded by three Vice-President (e), Martine Failly, representative of Blet Measurement Group, Marc-Robert…

Universal calibration tool featuring a large 7 inch LCD display, the 9010 now covers even more applications, Oscilloscope calibrator up to 400 MHz, insulation testers up to 1.5 kV, water meters energy and power analyzers. ACALIME will welcome you on booth 2L93 on Measurement World from September 6 to 9, 2021

Already owned by WIKA, the DH KUBLER laboratory changes its name and becomes the WIKA laboratory. Already owned by WIKA, the DH KUBLER laboratory changes its name and becomes the WIKA laboratory with new COFRAC accreditation numbers. This in order to provide the best possible support to its customers by offering them a wider range of services, in particular by ...

Multifunctional portable instrument for on-site calibration by WIKA With the new multifunctional calibrator CPH8000, WIKA makes on-site calibration even more efficient. This portable instrument measures pressure, temperature, current, voltage, frequency, pulses and ambient conditions. It is available in a portable version or in a rigid suitcase with a…